Custom Men Sublimated Casual Sport Shorts with Side Pockets for Brand Team Apparel and Sport Programs

Casual Sport Shorts with Side Pocket Configuration and Two Spot Print Programme

This men's casual sport short uses a polyester mesh knit fabric at 250 gsm, cut and sewn as a single layer garment with a side pocket configuration, drawcord waistband with eyelet and metal aglet, woven webbing at the bottom hem, mid thick elastic at the waistband, and a two spot print programme on the left leg hem and left waistband below waistband line.

The polyester mesh knit fabric at 250 gsm supports the sublimation direction across the body and the two spot print programme, while the side pocket configuration adds the practical pocket detail to the casual sport short. The drawcord waistband with eyelet and metal aglet closes the upper colour frame, while the woven webbing at the bottom hem closes the lower colour frame, and the side pocket set with self fabric match keeps the casual sport short reading cleanly across the 5XS to 5XL size block range.

Spot Print Guidance

This men's single layer casual sport short uses a polyester mesh knit fabric at 250 gsm, printed through a sublimation process that lays the deep red and grey print block across the body, plus a two spot print programme on the left leg hem and left waistband below waistband line. The single layer programme and the two spot print programme are planned together as one continuous sublimation programme and a separate spot print programme, not as separate printed overlays.

• Map the sublimation direction to the polyester mesh knit body with the colour change at each scene boundary executed in a single transfer pass to keep the black base readable across the full body
• Plan the drawcord waistband, the eyelet at the waistband, the metal aglet at both ends, the woven webbing at the bottom hem, the side pocket construction, and the spot print zones as solid knit or non printable zones, so the cut and sew structure stays consistent across the 5XS to 5XL size block
• Plan the two spot print zones with width and height by size block, so the left leg hem spot print and the left waistband spot print both read correctly across the active production size range
• Confirm the dye is suitable for Azo free requirements when supplying to restricted markets

Sublimation programme, single layer layout, sublimation direction, two spot print programme, side pocket configuration, eyelet and metal aglet, woven webbing, dye restriction, and label attachment are reviewed before sampling.

Typical Use for This Men's Casual Sport Short

With a polyester mesh knit fabric at 250 gsm, single layer construction, side pocket configuration, drawcord waistband with eyelet and metal aglet, woven webbing at the bottom hem, two spot print programme on left leg hem and left waistband, and a multi size block from 5XS through 5XL with segmented drawcord length by size block, this men's casual sport short works well for casual sport programs, brand team apparel, sports brand retail merchandise, and seasonal sports apparel where a coordinated mesh knit and spot print look is needed across the men's market segment.

• Casual sport programs for sport clubs, casual sport teams, recreational sport players, and seasonal sports teamwear batches
• Brand team apparel for casual team events, sport brand activations, and seasonal teamwear campaigns
• Sports brand retail merchandise for casual sport retail, summer and autumn casual sports campaigns, and event specific casual sport apparel
• Coordinated casual sport outfits for casual sport events, recreational activities, and seasonal casual wear
• Custom casual sport programs for casual sport retailers, sport brand marketing, and casual sport promotional events

Pattern direction, sublimation direction, two spot print programme, side pocket configuration, drawcord length segment, label details, base colour value, and size block are confirmed per project.

Every custom apparel project is managed through documented approval checkpoints designed to reduce avoidable production risk.

• Artwork, colour direction, material, and label details reviewed before sampling
• Sample feedback recorded before bulk production approval
• Pre-production details reconfirmed before production begins
• In-process quality checks and final inspection completed against the approved reference
• Label and packing requirements checked against the confirmed project details

Any change after approval is reviewed before it is added to the active production specification.

Bizarre Sports focuses on custom teamwear projects that need clear product communication from artwork through production approval.

• Custom project support built around your artwork, garment brief, and brand details
• Clear approval stages for sample, label, and production specifications
• Product information organised for practical review before bulk production
• One project record for confirmed details and revision tracking
• Custom OEM teamwear approach for seasonal, event, and branded apparel programs

Why does this casual sport short include a side pocket configuration?
The reference sample includes a side pocket configuration with pocket opening width, side pocket length, and side pocket width defined per project. The side pocket set with self fabric match adds the practical pocket detail to the casual sport short, paired with the woven webbing at the bottom hem and the eyelet and metal aglet at the drawcord waistband.

Why does the drawcord waistband use eyelet and metal aglet instead of a plain drawcord?
The reference sample uses an eyelet at the waistband to reinforce the drawcord exit points and a metal aglet at both ends of the drawcord for clean cord finishing. The eyelet and metal aglet combination supports repeated drawcord adjustment without fraying the waistband fabric, which is suitable for both casual sport use and team apparel.