Custom Men Sublimated Warehouse Repeat Casual Sport Shorts in Four SKU Colour Programme for Sport Teams

Repeat Casual Sport Shorts with Four SKU Colour Programme and Two Yarn Material Layout

This men's warehouse repeat casual sport short is built on a four SKU colour programme with two yarn material layout, using a polyester mesh knit fabric at 250 gsm and a polyester moisture wicking knit fabric at 140 gsm across the four SKU, cut and sewn as a single layer garment with a drawcord waistband with eyelet and metal aglet, woven webbing at the bottom hem, mid thick elastic at the waistband, side pocket configuration, two spot print programme in white and grey, code 128 hangtag programme, project specific carton programme, and a multi size block from 2XS through 5XL with segmented drawcord length by size block.

Two Yarn Material Layout Across Four SKU

This men's warehouse repeat casual sport short uses a two yarn material layout across the four SKU: two SKU built on a polyester mesh knit fabric at 250 gsm, and two SKU built on a polyester moisture wicking knit fabric at 140 gsm. The two yarn material layout is planned as one continuous bulk production programme, not as two separate production runs, so the colour story, the sublimation direction, the two spot print programme, and the size block stay consistent across the four SKU.

• Pair SKU on polyester mesh knit at 250 gsm with SKU on polyester moisture wicking knit at 140 gsm, so the four SKU share one bulk production cut and sew programme while each fabric supports its own colour direction
• Plan the drawcord waistband, the eyelet at the waistband, the silver metal aglet at both ends, the woven webbing at the bottom hem, the side pocket construction, and the spot print zones as solid knit or non printable zones, so the cut and sew structure stays consistent across the 2XS to 5XL size block
• Plan the two spot print zones with width 3.5 cm and height by proportion, with position adjusted relative to the reference bulk production to keep the white and grey mark readable across the four SKU
• Confirm the dye is suitable for Azo free requirements when supplying to restricted markets

Sublimation programme, two yarn material layout, four SKU colour programme, two spot print programme in white and grey, side pocket configuration, eyelet and silver metal aglet, woven webbing, dye restriction, and label attachment are reviewed before sampling.

Spot Print Guidance

This men's single layer warehouse repeat casual sport short uses a two yarn material layout pairing a polyester mesh knit at 250 gsm with a polyester moisture wicking knit at 140 gsm, printed through a sublimation process that lays the deep green, deep blue, and orange print block across the body, plus a two spot print programme in white and grey at the left side waistband. The single layer programme and the two spot print programme are planned together as one continuous sublimation programme and a separate spot print programme, not as separate printed overlays.

• Map the sublimation direction to the two yarn material layout with the colour change at each scene boundary executed in a single transfer pass to keep the base reading consistent across the polyester mesh knit SKU and the polyester moisture wicking knit SKU
• Plan the drawcord waistband, the eyelet at the waistband, the silver metal aglet at both ends, the woven webbing at the bottom hem, the side pocket construction, and the spot print zones as solid knit or non printable zones, so the cut and sew structure stays consistent across the 2XS to 5XL size block
• Plan the two spot print zones with width 3.5 cm and height by proportion, with position adjusted relative to the reference bulk production, so the white and grey mark both read correctly across the active production size range
• Confirm the dye is suitable for Azo free requirements when supplying to restricted markets

Sublimation programme, single layer layout, two yarn material layout, sublimation direction, two spot print programme in white and grey, side pocket configuration, eyelet and silver metal aglet, woven webbing, dye restriction, and label attachment are reviewed before sampling.

Every custom apparel project is managed through documented approval checkpoints designed to reduce avoidable production risk.

• Artwork, colour direction, material, and label details reviewed before sampling
• Sample feedback recorded before bulk production approval
• Pre-production details reconfirmed before production begins
• In-process quality checks and final inspection completed against the approved reference
• Label and packing requirements checked against the confirmed project details

Any change after approval is reviewed before it is added to the active production specification.

Bizarre Sports focuses on custom teamwear projects that need clear product communication from artwork through production approval.

• Custom project support built around your artwork, garment brief, and brand details
• Clear approval stages for sample, label, and production specifications
• Product information organised for practical review before bulk production
• One project record for confirmed details and revision tracking
• Custom OEM teamwear approach for seasonal, event, and branded apparel programs

Why does this warehouse repeat casual sport short include a four SKU colour programme?
The reference sample includes a four SKU colour programme with two SKU built on polyester mesh knit at 250 gsm and two SKU built on polyester moisture wicking knit at 140 gsm. The four SKU colour programme allows different colour stories inside one bulk production order while keeping the colour block reading consistent across the four SKU and the size block.