Custom Unisex Anime Gaming Graphic T-Shirt Cotton Single Jersey 180 GSM Washed Black Casual Streetwear Wear

Garment Construction

This unisex crew neck short sleeve T-shirt is cut from a 21/1 combed cotton single jersey at 180 GSM, pre-shrunk by enzyme wash for dimensional stability and a vintage washed-hand appearance. The body and sleeves share the same jersey, finished with a self-fabric all-around neck tape wrapping the shoulder seams and a single-needle top-stitch at the neckline.

Men's and Women's Same-Design Sizing

The men's and women's sizes share the same front and back graphic layout, with proportional grading on body length, chest, hem and sleeve length. Men's runs from XS to 6XL across 10 size tiers (body length 68.6-91.4 cm, sleeve length 39.4-62.2 cm); women's runs from XS to 4XL across 8 size tiers (body length 63.5-71.1 cm, sleeve length 35.6-50.8 cm).

Front Graphic Composition

Front graphic anchors on a multi-pastel crystal sigil composition centred below the neckline, layered in lavender + cyan + yellow + teal + green ink. The composition is sized proportionally to the chest width and discharges the dye from the cotton base to retain a soft hand feel.

Back Graphic Composition

Back graphic centres on a large faceted crystal composition surrounded by concentric ring and sigil fragments in lavender + cyan + yellow + gold ink, with the composition extending from the upper-back yoke to the mid-back. A subtle pixel-shard scatter bridges the central crystal and the surrounding sigil fragments to anchor the print on the full back panel.

Discharge Print Programmes

Two discharge print programmes are applied: a front-centre multi-colour sigil composition sized 23 × 21.25 cm at women's XS-L / men's XS-M, 26 × 24 cm at women's XL-4XL / men's L-3XL, and 30 × 27.6 cm at men's 4XL-6XL; plus a small gold cuff-centre sigil at 6 × 5.4 cm, 7 × 6.3 cm and 8 × 7.2 cm across the same size tiers. Discharge ink removes the dye from the cotton base for a soft hand feel and a wash-stable finish on the washed black fabric.

Heat-Set Ink Inside Neck Label

Brand and size marking is consolidated into a single heat-set ink label heat-pressed on the inside back neck, 2 cm below the neckline, sized 10 cm wide × 6 cm high. The label is identical for men's and women's and replaces woven labels to keep the neckline flat against the skin.

Washed Black Base and Construction

The washed black base is achieved by enzyme-washing the cotton jersey after sewing, producing a vintage washed-hand appearance with a slightly faded surface. The neckline is finished with a self-fabric all-around neck tape wrapping the inner back neck and extending to the shoulder seam, top-stitched with a single-needle line for a flat, durable neck finish.

Stitching and Reinforcement

Polyester thread throughout at 12-13 stitches per inch on the lockstitch seams and 14-15 stitches per inch on the four-thread overlock seams. Chain-stitched shoulder seams, single-needle top-stitch at the neckline, and contrast bartack reinforcement at the cuff junction and neck tape edge for a wash-stable finish.

Two-Tier Size Block

The two-tier size block covers men's XS-6XL and women's XS-4XL with full grading across 4 measurement points (body length, chest, hem, sleeve length); full shoulder width, single-shoulder width, cuff width, neck width and front neck drop will be confirmed by the factory during the dev sample stage and updated in this guide once the paper pattern is locked.

Packaging and Handling

The dev sample is folded three times with the front facing up and packed into a frosted EVA zip-lock bag sized to the garment, with the bag seam tightly sealed to prevent shifting in transit. Bulk-order packaging will follow the standard 10-bundle carton programme once the production order is confirmed.

Customisation Notes

The dev sample programme is sized for a single colourway (washed black) at this stage; additional colourway extensions require an enzyme-wash confirmation and may extend the production lead time by 2-3 weeks. Custom Pantone-matched discharge prints require a Pantone reference list shared at the enquiry stage.

Men's Crew Neck T-Shirt（10 尺码段 XS-6XL）

Women's Crew Neck T-Shirt（8 尺码段 XS-4XL）

Every Bizarre Sports order is shipped with a sample confirmation step, a pre-production photo for buyer approval, and a final inspection report before carton sealing. Lead time and MOQ are scoped to each enquiry; replacement or refund is honoured for manufacturing defects verified on receipt.

Bizarre Sports is a custom OEM teamwear manufacturer with a vertically integrated cut-and-sew workshop, in-house digital print line, and a sample-to-bulk turnaround that keeps anime, gaming and cartoon collections on a tight release calendar for brand and retail buyers.

Q1. Why does this T-shirt use a 21/1 combed cotton single jersey with enzyme wash rather than a 32/1 combed cotton single jersey?

A 21/1 yarn count delivers a slightly heavier and more textured hand feel that pairs with enzyme wash to produce the vintage washed-black appearance on the cotton base. A 32/1 yarn count would deliver a finer hand feel but would lose the visible washed texture that defines this programme.

Q2. Why is discharge print used at the front centre and cuff rather than plastisol print?

Discharge print removes the dye from the cotton base, leaving the ink embedded in the fabric rather than sitting on top of it. This produces a soft hand feel and a wash-stable finish on the washed-black base, whereas plastisol print would sit on the fabric surface and conflict with the vintage washed appearance.

Q3. Why is the inside neck label printed with heat-set ink rather than white plastisol?

Heat-set ink produces a softer finish than plastisol print and avoids the slight surface texture that plastisol would create on the washed-black neckline. The heat-set ink label is also more durable under repeat enzyme-wash cycles, which is important on the dev sample programme.

Q4. Why does the size block split into men's and women's tiers rather than running as a single unisex block?

The men's and women's blocks share the same graphic layout but grade differently on body length and sleeve length to match the standard men's and women's fit preferences. A single unisex block would compromise both the men's slim-fit preference and the women's tailored-fit preference on the same garment.