Custom Women Anime Gaming Graphic Hooded Windbreaker Polyester 4-Way Stretch Mesh Lining Reflective Streetwear Wear

Garment Construction

This women's hooded windbreaker is cut from a 4-way stretch woven fabric at the outer shell, with a mesh lining at the hood and a polyester mesh lining across the back neck to below the back vent. The hood is set with a drawstring threaded through metal eyelets at the hood brim and finished with a cord lock for adjustability. The hem is set with an elastic band and a cord lock for adjustability at the lower-back position.

Reflective Print Composition

Two reflective print programmes are applied: a small composition at the left chest in reflective silver ink; plus a composition above the back vent in reflective silver ink. Both programmes use reflective silver ink that catches light at night for visibility, layered against the 4-way stretch woven outer shell.

Hood and Drawstring Programme

The hood is set with a drawstring threaded through metal eyelets at the hood brim, finished with a cord lock. The hood lining is set in mesh fabric 110 GSM with a print programme that mirrors the hood silhouette. The hood pairs naturally with the front silver reflective-edge zipper at the centre-front closure.

Back Vent and Mesh Lining

A back vent opening is set on the back panel, covered by a polyester mesh lining extending from the back neck to below the back vent. The mesh lining delivers breathability through the vent while protecting the back panel from direct airflow.

Zippered Pocket Programme

Zippered pockets are set at the left chest, both side seams and the hood, finished with pocket zippers for a clean pocket entry. The pocket zippers are bartack-reinforced at the corners to prevent tearing after repeat wear.

Hem and Cord Lock Programme

The hem is set with an elastic band and a cord lock for adjustability at the lower-back position, threaded through metal eyelets at the side seams. The hem pairs with the hood drawstring to deliver a silhouette adjustability programme at the top and bottom of the jacket.

Stitching and Reinforcement

Polyester thread throughout, with contrast top-stitching at the hood and hem junctions, chain-stitched seams at the side seams, bartack reinforcement at the pocket corners, drawstring eyelets and reflective print edges for a wash-stable finish.

Sizing and Fit

Seven-size block runs from 2XS to 2XL with full grading across 10 measurement points (front body length, back body length, chest, waist, hem, collar height, sleeve length from CB, sleeve opening, hood length, hood width). The women's silhouette supports a fitted waist with proportional grading on the body length and sleeve length.

Packaging and Handling

Each garment is packed into a plain polybag with a size sticker on the outside. Single garment per bag; multiple bags are bundled into one blank 3-ply 5-wall high-strength corrugated carton. Two carton stickers are applied to the outer carton, and the carton is reinforced with a well-shape strapping band pattern to meet the export standard.

Customisation Notes

Custom reflective print programmes and mesh lining colours are accepted with separate print ink lots. Custom hood drawstring programmes and hem cord lock programmes require additional hardware. Custom 4-way stretch woven fabric colours are accepted with separate yarn lots.

Every Bizarre Sports order is shipped with a sample confirmation step, a pre-production photo for buyer approval, and a final inspection report before carton sealing. Lead time and MOQ are scoped to each enquiry; replacement or refund is honoured for manufacturing defects verified on receipt.

Bizarre Sports is a custom OEM teamwear manufacturer with a vertically integrated cut-and-sew workshop, in-house print and reflective programme line, and a sample-to-bulk turnaround that keeps anime, gaming and cyber collections on a tight release calendar for brand and retail buyers.

Q1. Why does this windbreaker use a 4-way stretch woven fabric rather than a non-stretch woven fabric?

A 4-way stretch woven fabric delivers multi-direction stretch that supports the hood drawstring adjustability, the hem cord lock adjustability and the reflective print programme without distorting the silhouette. A non-stretch woven fabric would restrict movement and cause the reflective print ink to crack at the joints.

Q2. Why is a back vent opening covered with mesh lining rather than a solid lining?

A back vent opening covered with mesh lining delivers breathability through the vent while protecting the back panel from direct airflow. A solid lining would block the vent and reduce the ventilation programme; an open vent would expose the back panel to direct airflow and reduce insulation.

Q3. Why is the size block 2XS to 2XL rather than a wider range?

The 2XS-2XL block covers the standard women's windbreaker fit range without requiring additional grading on the chest, waist, hem and sleeve length. Extending the range would require an additional reflective print size tier and a second dye lot for the 4-way stretch woven fabric.

Q4. Why are reflective prints applied at two positions (left chest + back vent)?

Two-position reflective prints deliver visibility from both the front and the back of the wearer, with the back vent position doubling as a graphic anchor. A single left-chest reflective print would lose the back visibility and miss the back vent position.