Custom Men Sublimated Basketball Shorts with Side Slit Opening for Brand Team Apparel and Training Programs

Sublimation Print Guidance

This men's single layer basketball short uses a 100% polyester moisture wicking knit fabric at 140 gsm, printed through a sublimation process that lays the geometric crack pattern direction across the body, the deep red and gold side block on both side panels, the three shade sublimation on the front left lower leg, and the white sublimation on the front right lower leg directly into the polyester face. The single layer programme and the two position sublimation logo programme are planned together as one continuous sublimation programme and a separate cut and sew programme, not as separate printed overlays.

• Map the geometric crack pattern to the polyester moisture wicking body with the colour change at each scene boundary executed in a single transfer pass to keep the black base readable across the full body
• Plan the drawcord waistband, the side slit opening zones with bartack reinforcement, the two position sublimation logo zones on front left and right lower legs, and the bottom hem zones as solid knit or non printable zones, so the cut and sew structure stays consistent across the 6XS to M size block
• Confirm the polyester moisture wicking knit fabric supports full body coverage, so the front and back panels read as one continuous geometric crack pattern scene with deep red and gold side block framing
• Confirm the dye is suitable for Azo free requirements when supplying to restricted markets

Sublimation programme, single layer layout, geometric crack pattern direction, side colour block, two position sublimation logo programme, side slit opening with bartack reinforcement, dye restriction, and label attachment are reviewed before sampling.

Typical Use for This Men's Basketball Short

With a 100% polyester moisture wicking knit fabric at 140 gsm, single layer construction, side slit opening at the bottom hem with bartack reinforcement, geometric crack pattern direction, side colour block on both side panels, two position sublimation logo programme on front left and right lower legs, drawcord waistband, and a multi size block from 6XS to M with segmented drawcord length, this men's basketball short works well for repeat order reference programmes, school basketball teams, club basketball teams, basketball training camps, and basketball event apparel where a coordinated geometric crack pattern look is needed across the men's market segment.

• Repeat order reference programmes for basketball team apparel, school basketball batches, and seasonal basketball teamwear
• School basketball teams for primary school, middle school, high school, and youth basketball training batches
• Club basketball teams for amateur clubs, recreational basketball players, and basketball training camps
• Coordinated sports event apparel for charity basketball events, school sport days, and brand sport activations
• Custom sports team programs for basketball clubs, school sport staff, and basketball brand promotional events

Pattern direction, single layer programme, geometric crack pattern direction, two position sublimation logo programme, side slit opening with bartack reinforcement, drawcord length segment, label details, base colour value, and size block are confirmed per project based on the repeat order reference programme.

Care and Wear Guidance

This men's basketball short is built on a 100% polyester moisture wicking knit fabric at 140 gsm, with a single layer construction, side slit opening at the bottom hem with bartack reinforcement, geometric crack pattern direction, side colour block on both side panels, and two position sublimation logo blocks on front left and right lower legs. To keep the geometric crack pattern, the moisture wicking face, the side colour block, and the sublimation logo blocks in good condition through basketball training use, follow the care labels provided with each pair.

• Turn the shorts inside out before washing to protect the printed body, the two sublimation logo blocks on front left and right lower legs, the deep red and gold side colour block, and the bartack reinforced side slit opening
• Wash similar colours together with mild detergent, separating from light coloured garments if the geometric crack pattern and the deep red and gold side colour block risk bleeding into the moisture wicking face
• Avoid chlorine bleach and harsh rubbing on the printed body, the two sublimation logo blocks, the side slit opening, the side colour block, and the colour change zones
• Reshape the drawcord waistband and the side slit opening after washing to keep the rib knit and bartack reinforcement even across the 6XS to M size block
• Lay flat or hang to dry away from direct sunlight, removing any attached hangtag or loop label if it is tied by string

The final care wording for the target market is confirmed per project.

Measurements are shown in inches. This men's basketball short reference is sized from 6XS through 3XL, covering 12 size points on the size table header. The bulk production order covers 6XS through M, with 8 size points actively filled in the production breakdown. The L, XL, 2XL, and 3XL columns appear in the size table header for reference only, with no bulk production data filled. Confirm the size block choice for each project before bulk production.

Every custom apparel project is managed through documented approval checkpoints designed to reduce avoidable production risk.

• Artwork, colour direction, material, and label details reviewed before sampling
• Sample feedback recorded before bulk production approval
• Pre-production details reconfirmed before production begins
• In-process quality checks and final inspection completed against the approved reference
• Label and packing requirements checked against the confirmed project details

Any change after approval is reviewed before it is added to the active production specification.

Bizarre Sports focuses on custom teamwear projects that need clear product communication from artwork through production approval.

• Custom project support built around your artwork, garment brief, and brand details
• Clear approval stages for sample, label, and production specifications
• Product information organised for practical review before bulk production
• One project record for confirmed details and revision tracking
• Custom OEM teamwear approach for seasonal, event, and branded apparel programs

Why does this basketball short use a repeat order reference programme instead of a fresh design programme?
The reference sample is built on a repeat order reference programme, keeping the colour direction, the cut and sew programme, the side colour block, the two position sublimation logo block, and the side slit opening with bartack reinforcement consistent with the original reference order. The repeat order reference programme allows the bulk production repeat to reuse the same sublimation programme and the same eight size block range, reducing the approval time and the colour direction review across the repeat run.

Why does this basketball short use a deep red and gold side colour block on the side panels?
The reference sample uses a deep red and gold side colour block on both side panels, framing the black body with a clean colour frame. The deep red and gold direction matches the repeat order reference programme's colour identity, allowing the same sublimation programme to serve both the basketball training use and the brand colour identity. The side colour block is joined at the outer thigh seam from waistband to bottom hem, keeping the colour frame even across the 6XS to M size block.