Custom Unisex Anime Gaming Graphic Full Zip Hoodie Cotton Fleece 320 GSM YKK Metal Zipper Streetwear Activewear Lifestyle

Garment Construction

This unisex full zip hoodie is cut from a 100% cotton heavy fleece at 320 GSM, pre-washed for dimensional stability. The body and sleeves share the same fleece weight, while the hood inner panel, body lining and sleeve lining are built from a 100% combed cotton single jersey at 180 GSM for a soft next-to-skin feel.

Front Graphic Composition

Front graphic anchors on a left-chest diamond-and-eye emblem in cyan and orange ink, sized proportionally to the size block. The left sleeve carries a flowing blue-ice shard composition extending from shoulder to cuff, and the right sleeve carries a mirrored shard composition, creating a wrap-around cyan-and-orange fantasy motif.

Back Graphic Composition

Back graphic centres on a rising crystal citadel with a glowing orange sun-burst at the upper chest, surrounded by four-quadrant compass markings. Below the citadel, blue ice shards radiate outward and orange ember particles drift toward the hem, creating a layered crystalline scene that wraps the full back panel.

Print Position and Block

Print placement is graded across three size tiers: XS to M with 8.9 × 7.6 cm left chest emblem and 29 × 31 cm back graphic; L and above with 10.2 × 8.6 cm left chest emblem and 31 × 33 cm back graphic; 4XL and above with 33 × 35 cm back graphic. Front and back prints share a 16.5 cm drop from centre back neck for size consistency.

YKK Metal Zipper and Pull

Front closure uses a YKK silver metal zipper with a custom star logo pull in matching silver finish; the star logo pull is the signature hardware detail for this collection.

Hood, Drawcord and Kangaroo Pocket

The hood is constructed with a 130 cm flat drawcord finished with metal aglets; the drawcord is colour-matched to the orange lining for a contrast reverse effect. The kangaroo pocket is reinforced at the upper and lower bartack points to handle bulk wear; the ribbed cuffs and ribbed hem are set at 7.5 cm and 6.35 cm height for a clean shape recovery.

Two-Tone Lining

Hood inner panel, body lining and sleeve lining are cut from the orange lining fabric, creating a tonal contrast against the black outer fleece. The lining carries a single rotary screen print repeat at 38 × 29 cm, applied in a single colour for a clean tonal overlay on the orange base.

Main Label and Marking

Main label is a black background orange woven label, folded to 3.2 × 7.6 cm with 0.5 cm seam allowance on top and bottom, sewn at the centre back inner neck so the label sits flat against the lining fold and remains visible when the garment is folded into the retail bag.

Sizing and Fit

Size block runs from XS to 6XL with full grading across 16 measurement points (back length, shoulder, chest, hem, centre front zipper length, sleeve length, cuff rib, hem rib, neck width, back neck drop, front neck drop, pocket height, pocket top width, pocket centre width, hood height, hood width, drawcord length). This 10-size block supports unisex fit for men and women.

Colour Variant Programme

This collection is offered in a six-colour variant programme: Black with Cyan-Orange Print, Charcoal with Orange Lining, Deep Purple with Lavender Lining, Navy with Sky-Blue Lining, Black with Red Lining, and Heather Grey with Stone Lining. Each variant shares the same graphic layout and graded print blocks; lining colour is the variant differentiator.

Co-Ordinated Trouser Set

Each hoodie variant can be paired with a matching straight-leg cotton fleece trouser in the same base colour; the trouser is sold as a separate SKU but shares the collection's graphic language on the side seam panels.

Packaging and Handling

Each garment is folded three times with the front facing up and packed into a frosted EVA zip-lock bag with a vent hole for retail compliance. Greasy-proof paper is layered over the print area before bagging to protect the print finish; a barcode sticker is applied to the upper-left front of the bag. Multi-region cartons follow the buyer's routing label and a 12–21.5 kg per-carton weight limit.

Customisation Notes

Print dimensions are sized to the artwork brief and re-proportioned per size tier; factory may adjust the back centre drop measurement within a 16.5–20.5 cm range to keep the artwork centred on the back panel for larger sizes.

Every Bizarre Sports order is shipped with a sample confirmation step, a pre-production photo for buyer approval, and a final inspection report before carton sealing. Lead time and MOQ are scoped to each enquiry; replacement or refund is honoured for manufacturing defects verified on receipt.

Bizarre Sports is a custom OEM teamwear manufacturer with a vertically integrated cut-and-sew workshop, in-house print line, and a sample-to-bulk turnaround that keeps anime, gaming and cartoon collections on a tight release calendar for brand and retail buyers.

Why does this hoodie use heavy fleece 320 GSM rather than a mid-weight fleece?

Heavy fleece at 320 GSM delivers a structured silhouette that holds the graphic print flat and keeps the kangaroo pocket and drawcord hood in shape, while a mid-weight fleece would drape too soft for the layered crystal artwork on the back panel.

Can the lining colour be re-dyed for a custom colourway beyond the six-stock programme?

Yes, the lining can be custom-dyed to a buyer-specified colourway with a minimum dye lot of 200 kg per colour; share the target Pantone reference and the desired lining colour at the enquiry stage so the factory can quote the dye surcharge and extended lead time.

What is the star logo metal zipper pull and can it be replaced with a custom pull?

The star logo metal zipper pull is the signature hardware detail that matches the brand's star-comet graphic language. It can be replaced with a buyer-specified custom pull on a minimum order of 1,000 units per pull style; share the pull artwork and finish specification at the enquiry stage for a custom-pull quote.