Custom Unisex Anime Gaming Graphic Long Sleeve Tee Cotton Single Jersey 180 GSM Heather Grey Streetwear Apparel

Garment Construction

This unisex crew neck long sleeve T-shirt is cut from a 100% combed cotton single jersey at 180 GSM, pre-shrunk for dimensional stability. The body and long sleeves share the same jersey, with a cotton 1×1 rib knit cuff at the sleeve opening for shape recovery after repeat wear.

Front Graphic Composition

Front graphic anchors on a small pixel-gem composition at the left chest, layered in dark-green + crimson-red + electric-blue + bright-yellow ink. The composition is centred below the high-point shoulder and sized proportionally to the chest width, leaving the rest of the front panel clean for a wearable everyday look.

Back Graphic Composition

Back graphic centres on a black feline magical creature seated on a glowing gemstone platform, framed by a teal crescent and a scattered pixel-shard composition in green + red + blue + yellow ink. The composition extends from the upper-back yoke to the mid-back, balancing the print across the full back panel without crowding the lower hem.

Screen Print Programmes

A silk screen print programme is applied at two fixed positions: an L-size 80 mm wide left-chest emblem (18 cm below the high-point shoulder, scaled proportionally per size) and a large back panel emblem spanning 60-70% of the back width. Plastisol ink delivers a soft hand feel and a wash-stable finish on the heather grey base fabric.

Heather Grey Base and Neck Tape

The heather grey base is achieved by blending black and white yarns at the spinning stage, producing a soft melange appearance that pairs naturally with the multi-colour screen print. The neckline is finished with a self-fabric all-around neck tape wrapping the inner back neck and extending to the shoulder seam, top-stitched with a single-needle line for a flat, durable neck finish.

Cuff and Sleeve Construction

The long sleeves are finished with a 1×1 cotton rib knit cuff sized to the wrist circumference, with a chain-stitched shoulder seam for reinforcement and a bartack at the cuff-to-sleeve junction to prevent tearing after repeat wear. The sleeve length tapers from 83.8 cm at XS to 101.3 cm at 6XL across 10 size tiers.

Plastisol Brand Label

Brand and size marking is consolidated into a single white plastisol print heat-pressed on the heather grey fabric at the inside back neck (1.5 cm below the seamline, centred), with a print width of 4 inches (10.16 cm). The plastisol print replaces woven labels and keeps the neckline flat against the skin.

Stitching and Reinforcement

Polyester thread throughout at 12-13 stitches per inch on the lockstitch seams and 14-15 stitches per inch on the four-thread overlock seams. Chain-stitched shoulder seams, single-needle top-stitch at the neckline, and contrast bartack reinforcement at the cuff junction and neck tape edge for a wash-stable finish.

Sizing and Fit

Ten-size block runs from XS to 6XL with full grading across 4 measurement points (body length, chest, hem, sleeve length); full shoulder width, single-shoulder width, cuff width, neck width and front neck drop will be confirmed by the factory during the dev sample stage and updated in this guide once the paper pattern is locked.

Packaging and Handling

The dev sample is folded three times with the front facing up and packed into a frosted EVA zip-lock bag sized to the garment, with the bag seam tightly sealed to prevent shifting in transit. Bulk-order packaging will follow the standard 10-bundle carton programme once the production order is confirmed.

Customisation Notes

The dev sample programme is sized for a single colourway (heather grey) at this stage; additional colourway extensions require a yarn-blend dye lot confirmation and may extend the production lead time by 2-3 weeks. Custom Pantone-matched prints require a Pantone reference list shared at the enquiry stage.

Every Bizarre Sports order is shipped with a sample confirmation step, a pre-production photo for buyer approval, and a final inspection report before carton sealing. Lead time and MOQ are scoped to each enquiry; replacement or refund is honoured for manufacturing defects verified on receipt.

Bizarre Sports is a custom OEM teamwear manufacturer with a vertically integrated cut-and-sew workshop, in-house digital print line, and a sample-to-bulk turnaround that keeps anime, gaming and cartoon collections on a tight release calendar for brand and retail buyers.

Q1. Why does this T-shirt use a heather grey cotton single jersey rather than a solid colour base?

Heather grey is achieved by blending black and white yarns at the spinning stage, producing a soft melange finish that pairs naturally with multi-colour screen print programmes and reduces the visibility of minor fabric imperfections. A solid colour base would require four separate dye lots for the multi-colour print, adding to the per-colourway lead time.

Q2. Why is the brand label printed with white plastisol rather than woven?

Plastisol print consolidates brand and size marking into a single heat-pressed print on the heather grey fabric, removing the woven label fold and stitch bulk at the neckline. The plastisol print keeps the neckline flat against the skin and reduces the label-edge irritation common on cotton single jersey programmes.

Q3. Why is the screen print programme applied at the left chest and back panel only?

A two-position screen print programme keeps the sleeve panels and side panels clean for a wearable everyday look, while the back panel carries the hero graphic. Adding sleeve or side prints would require additional screen registration and extend the per-garment print time by 30-40%.

Q4. Why does the size block run from XS to 6XL rather than stopping at a smaller range?

A 10-size block from XS to 6XL supports both the slim-fit Asian-market chest range (XS-S) and the big-and-tall overseas-market chest range (4XL-6XL), with body length tapering from 68.6 cm at XS to 91.4 cm at 6XL. The dev sample will confirm the inter-size grading once the factory paper pattern is locked.